dwell time造句

• 130km per hour maximum , 60km per hour average ( including dwell time )
  最高每小时130公里，平均每小时60公里（包括停站时间）
• The maximum of electron dwell time in the irradiated area is relation to the transmission ; 4
  电子在辐照区逗留时间的与透射率有对应关系； 4
• If you do not see any puff , increase the heat and / or dwell time in the conveyor oven
  如果没有出现发泡效果，增加热度和/或者网带炉的停留时间。
• If you do not see any suede , increase the heat and / or dwell time in the conveyor oven
  如果没有出现发泡效果，增加热度和/或者网带炉的停留时间。
• The maximum train speed is 130 km per hour , average speed is 60 km per hour ( including dwell time )
  车速最高每小时130公里，平均每小时60公里(包括停站时间) 。
• These days american units get nothing like the recommended 2 : 1 ratio of dwell time to deployment
  近来，美军作战单位从未得到类似推荐驻军的比例为2 : 1的轮休时间。
• The input range , dwell time , the acquired channel of the module can be controlled according to the need
  数据采集模块的输入范围、采样时间、采集通道都可以根据实际需要进行控制。
• Z - axis feed dwell time at the hole bottom in a spot - machining spot cycle . set this time in spindle revolutions
  在一个点加工的点循环中，在该孔底z轴进给驻留时间。在主轴回转数中设置该时间。
• In the sixth year of the “ war on terror ” deployments in war zones are ever longer , while “ dwell time ” at home to recover is shorter
  进入“反恐战争”的第六年，在战区部署的时间更长了，而在家里停留的时间却更短了。
• The start of pulse injection , injection - pulse numbers , injection period of each pulse and the dwell time between injection pulses are controlled by a fircri injector system
  它通过电控高压共轨喷油器控制燃油多次喷射，从而控制燃油预混合气的形成和着火时刻。
• Based on the characteristics of rotary symmetrical aspheric surface , tracks programming algorithm is given , the 2 - dimension removal function is reduced into 1 - dimension , finally the dwell time algorithm is presented
  针对气囊抛光加工回转对称非球面的特点，进行抛光路径规划，对去除函数进行降维处理，提出抛光驻留时间的计算方法。
• Conclusion expert pilots demonstrates more frequent fixations with shorter dwell time than novice pilots do ; to both pilots , the conclusion can be drawn that the variation between workloads and performance is not fixed
  结论高级飞行员比学员具有更频繁地注视和更短地注视时延（停留） ；对两类飞行员而言，他们的工作负荷与操作绩效的关系都不是绝对一致变化的。
• Three types of rescheduling operations are considered : ( 1 ) speed and time control to reduce regular dwell time and / or running time ; ( 2 ) holding the preceding and / or succeeding succeeding train to regulate headway ; and ( 3 ) cancellation the operation of delayed trains
  系统绩效指标包括：旅客观点之平均旅行时间与列车乘载率差异，及行车调度人员观点之延滞列车站数与系统延滞时间等。
• During the temperature fields , the results indicate that the processing parameters such as the extrusion velocity , casting temperature , perform preheating temperature , die preheating temperature and so on are important for the temperature fields besides the dwell time . they are must be in concordance each other to the deforming zone is in the quasi - solid state , and the stable semi - solid extrusion is implemented . during the deforming fields , the hyperbolic sine thermo - rigid - viscoplastic fem model is selected according to the forming feature of the process , and the variations of the stress - strain fields are studied
  在温度场的模拟中，模拟结果表明，保压时间是影响制件成形质量的关键因素之一，挤压速度、液态金属浇注温度、预制体预热温度和模具预热温度等工艺参数对温度场的影响也很大，需进行参数之间的协调，只有当变形区内部始终维持准固态时，才能实现稳定的液-固挤压成形过程；在变形场的模拟中，根据液态浸渗挤压的成形特征，选用了双曲正弦刚-粘塑性有限元计算模型，研究了变形过程中应力应变场的变化规律，研究了模角对变形和金属流动的影响及变形力的变化过程和其影响因素。
• The dielectric constants of silica - rich , alumina - rich , and stoichiometric mullite ceramics are 5 . 5 , 6 . 0 and 6 . 3 respectively . the dielectric constant of mullite - si / c / n composites is related with the sintering parameters . with the increase of the sintering temperature and dwelling time , the " " and tg of mullite - si / c / n composites are decreased , this phenomenon is related with the change of the microstructure and phase composition of nano si / c / n powders
  莫来石- si c n复合材料的介电常数与热压烧结工艺有很大的关系，随热压烧结温度( 1450 1600之间)的升高，烧结时间(烧结温度为1550 )的增长，莫来石- si c n复合材料的介电常数实部、虚部及介电损耗角正切均明显下降，这与吸收剂的性质随温度和时间的变化有关。
• The solution formula of dwell time is deduced by using the pulse iteration method and the smoothing fourier transition method , and the formula can be simplified referring to workpiece shape . according to the anastomotic status of the tool and workpiece surface , we present the new model of the inherent relation among local pressure density , removal rate , convergence ratio and residual errors , and the corresponding formulas are given . the forming cause of the edge effect in the polishing process is analyzed , and the means which reduces the edge effect is put forward
  2 、针对计算机控制光学表面成形( ccos )的加工方式、误差收敛特点，研制了去除函数呈高斯分布的双转子结构研抛模；采用脉冲迭代法、平滑因子傅立叶变换法推导出驻留时间的算法，求解过程中根据工件面形的特点作了各种形式的简化；提出了工件表面和研抛模的吻合误差与局部压强、材料去除率、收敛比之间内在关系的数学模型，并推导出相应的计算公式；分析了边缘效应产生的原因，在加工过程中采用相对压力因子对去除函数进行修正，可以消除边缘效应的影响。
• Abstract : analyzing the general method of temperature screening for assembly in our country , combined with the experience of accelerated testing abroad , we proposed a definition method of parameters , such as temperature range , rate of change of temperature and dwell time . in this paper , we introduce some experience in a temperature screening of a mainboard
  摘要：分析了目前国内在组件温度筛选方面的一般做法，吸收国外加速试验的经验，并借鉴定量筛选中根据成效率确定无故障检验时间的方法，提出了组件温度筛选中各参数(如温度范围、温度变化速率、高低温保持时间和循环数)的确定方法，并以一种税控加油机主板的温度筛选为例，介绍了组件温度筛选方法研究中所总结的一些经验。
• With the increase of dwelling time or si / c / n content , the " " and tg ? of mas - si / c / n composites are increased . the dielectric constant of mas - si / c / n composites reduces obviously with the increase of frequency , and its tg is quite high , so it is a possible candidate for absorber layer of high temperature radar absorbing materials
  随着烧结时间(烧结温度为1200 )的增长， mas - si c n复合材料的介电常数实部和虚部增大，随着吸收剂含量的增多， mas - si c n复合材料的介电常数实部、虚部和介电损耗角正切均增大。